Certified OEM Used Car Parts
Certified OEM Recycled Part Part # AVP-0055

Firestone Airide Ride-Rite Air Spring Kit

$1,408.68 In stock, ready to freight

Firestone Airide Ride-Rite Air Spring Kit is a suspension parts catalog item from Firestone Airide. It is intended for applications compatible with the selected model and its manufacturer-specified installation requirements. Confirm the exact part number, package configuration and vehicle or equipment application before ordering; this description does not establish universal fitment.

  • Brand Name: Firestone Airide
  • Warranty Terms: 1-Year Comprehensive Replacement Guarantee
  • Fitment Guarantee: Vehicle-specific fitment not confirmed. Check year, make, model, trim, drivetrain and manufacturer fitment guide; verify VIN where supported.
  • Nationwide Shipping: Free Freight with Liftgate Delivery (3-5 Business Days across USA)
Category: Suspension Parts
Buy Now
Aftermarket Products Sold By Keystone
  • Tested & inspected
  • Genuine OEM quality
  • Fitment guaranteed
Questions on fitment? Call our ASE tech team: +1-888-370-9806
Share part

Firestone Airide Ride-Rite Air Spring Kit

PRODUCT FUNCTION AND DESIGN

The Firestone Airide Ride-Rite Air Spring Kit is an aftermarket suspension enhancement system designed to provide additional load support, improve vehicle stability, and help maintain a level ride when carrying heavy cargo or towing trailers.

The system uses adjustable air springs installed between the vehicle's frame and suspension to supplement the existing suspension components. By adjusting air pressure within the springs, drivers can compensate for changes in load distribution, reduce rear-end sagging, and improve vehicle handling under supported operating conditions.

Ride-Rite air springs are engineered to work alongside the vehicle's original suspension rather than replace its primary springs or shock absorbers. The system is particularly suited to compatible pickup trucks, SUVs, and commercial vehicles used for towing, hauling, and other load-carrying applications.

Depending on the application, Ride-Rite kits feature reinforced rubber air springs, vehicle-specific mounting brackets, pneumatic air lines, and inflation valves. Their adjustable design allows the suspension support to be tailored to different load conditions while remaining within the manufacturer's operating limits.

Important: Ride-Rite air springs do not increase a vehicle's manufacturer-rated payload capacity, Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR), or towing capacity.

TECHNICAL SPECIFICATIONS

SpecificationDetails
BrandFirestone Airide
Product NameFirestone Airide Ride-Rite Air Spring Kit
Product CategorySuspension Parts
Product TypeSupplemental Air Suspension Kit
Suspension ApplicationLoad-Leveling and Load Support
Air Spring TypeReinforced Rubber Air Springs
Installation PositionRear Suspension on typical Ride-Rite applications
Load SupportUp to 5,000 lbs on applicable Ride-Rite kits; confirm exact SKU
Air Pressure RangeCommonly 5–100 PSI; verify exact kit
Air Pressure AdjustmentManual Inflation or Compatible Optional Compressor System
Mounting ConfigurationVehicle-Specific Brackets
Air LinesIncluded on applicable kits
Inflation ValvesIncluded on applicable kits
Vehicle CompatibilitySelected Trucks, SUVs, and Commercial Vehicles
OEM / Part NumberRequires Exact Firestone Kit Number
WarrantyManufacturer Limited Warranty; confirm current terms

VEHICLE COMPATIBILITY AND INSTALLATION

Firestone Ride-Rite Air Spring Kits are designed for specific vehicle applications and must be selected according to the vehicle's year, make, model, drivetrain, suspension configuration, and manufacturer fitment requirements.

Before purchasing, verify whether the vehicle is equipped with factory suspension modifications, aftermarket lift components, lowered suspension, or other accessories that may affect installation.

The air springs are typically installed between the vehicle's frame and rear suspension using application-specific brackets and hardware.

Installation generally involves positioning the air spring assemblies, securing the mounting brackets, routing the pneumatic air lines, and installing inflation valves in an accessible location.

Some applications require drilling or additional installation procedures, while others use existing mounting locations.

After installation, the air springs must be inflated to the manufacturer-recommended pressure and inspected for leaks, interference, and correct suspension clearance.

Air lines must be routed away from sharp edges, exhaust components, moving suspension parts, and other potential sources of damage.

Safety Requirement: Never exceed the vehicle manufacturer's GVWR, GAWR, payload, or towing ratings. Air springs provide supplemental suspension support but do not increase the vehicle's certified load-carrying capacity.

PACKAGE CONTENTS

A typical Firestone Ride-Rite Air Spring Kit includes:

  • Two supplemental air springs for the supported suspension application.

  • Vehicle-specific upper and lower mounting brackets.

  • Pneumatic air lines and fittings.

  • Inflation valves for manual pressure adjustment.

  • Required mounting hardware for the specified installation.

  • Manufacturer installation instructions.

Package contents vary by manufacturer part number and vehicle application.

An onboard air compressor, electronic pressure controller, wireless control system, and air tank are generally optional accessories unless specifically included in a particular kit.

Confirm the complete contents against the official Firestone product listing before publishing the final product information.

QUALITY INSPECTION AND FUNCTIONAL CHECKLIST

Before installation or shipment, the following inspection procedures are recommended:

  1. Verify the Firestone manufacturer part number and confirm vehicle compatibility.

  2. Inspect the air springs for cuts, abrasions, deformation, or visible manufacturing defects.

  3. Examine the rubber surfaces and crimped connections for damage.

  4. Check mounting brackets for cracks, bending, corrosion, or dimensional irregularities.

  5. Inspect pneumatic air lines and fittings for damage or contamination.

  6. Verify that the required mounting hardware and inflation valves are present.

  7. Confirm adequate clearance between the air springs and surrounding suspension components.

  8. After installation, inflate the system according to the manufacturer instructions.

  9. Perform an air-leak inspection using an appropriate leak-detection solution.

  10. Verify that air pressure remains within the specified operating range and that suspension movement is unobstructed.

  11. Check that air lines are securely routed and protected from heat and abrasion.

  12. Reinspect mounting hardware and system operation according to the manufacturer's maintenance instructions.

These procedures are recommended acceptance and installation checks. They do not represent completed manufacturer testing or independent laboratory certification.

MANUFACTURER TESTING AND PERFORMANCE DATA

Firestone designs Ride-Rite air spring systems to provide supplemental suspension support and help maintain vehicle ride height under supported load conditions.

Applicable Ride-Rite kits may provide up to 5,000 pounds of load-leveling support, depending on the exact product configuration. This figure represents supplemental air-spring load support and must not be interpreted as an increase in the vehicle's legal or manufacturer-rated payload capacity.

Many Ride-Rite kits operate within an air pressure range of approximately 5–100 PSI. Actual minimum and maximum operating pressures must be confirmed for the selected manufacturer part number.

The air springs use reinforced rubber construction intended to withstand repeated compression and extension during normal suspension movement.

Performance depends on vehicle weight, load distribution, suspension condition, installation quality, and correct air pressure.

No individual laboratory pressure-test results, fatigue-cycle measurements, burst-pressure certificates, or independent durability-test reports have been verified for this unspecified Ride-Rite kit.

Quantitative performance claims should be published only when supported by the manufacturer's documentation for the exact product SKU.

WARRANTY AND DOCUMENTATION

Firestone Airide provides manufacturer warranty coverage for eligible Ride-Rite suspension products, subject to applicable warranty terms, product eligibility, exclusions, and claim requirements.

Warranty coverage may differ between air springs, brackets, fittings, and other kit components. The precise warranty period and conditions should be verified for the selected product before publication.

Customers should follow Firestone's official installation instructions for mounting, inflation pressure, air-line routing, leak testing, and routine maintenance.

Official Manufacturer Website: https://www.firestoneairide.com/

Documentation Status: This description applies to the Firestone Ride-Rite Air Spring Kit product family. Exact vehicle fitment, manufacturer part number, operating pressure, load-support rating, installation requirements, package contents, and warranty details must be confirmed for the selected SKU.

Testing Note: Pneumatic leak testing and air-pressure verification are relevant to this suspension product. Engine-cylinder compression testing is not applicable.

Guaranteed exact fit by vehicle VIN

To ensure 100% plug-and-play fitment, our technical specialists run every order through our nationwide OEM interchange database before freight shipment.

Specification Donor vehicle & component verification
Part ConditionCertified Pre-Owned OEM Used Component
Part / Casting NumberAVP-0055
Donor MileageFirestone Airide
Testing ProcedureCold compression tested, borescope cylinder wall inspection, and leak-down test passed.
Warranty Protection1-Year Comprehensive Replacement Guarantee
Freight ShippingCommercial liftgate freight included (3-5 business days across mainland USA)

5.0

Based on 10 certified buyer reviews

100% of customers would recommend this OEM part to a colleague or mechanic.

All reviews are verified purchases shipped directly from Auto Vehicle Parts dismantler partners.

Robert Kowalski — Austin, TX Verified buyer

Engine arrived securely bolted to a heavy-duty wooden pallet with shrink wrap. Compression test was exactly as advertised. Dropped right into my truck and fired up with zero CEL codes. Saved over $2,000 compared to dealer crate motor!

Auto Parts Cart (0)

Your auto parts cart is currently empty.

Shop Used Auto Parts
Product added to your cart