The B&M Hi-Tek Deep Transmission Pan, part number 70295, is a performance-oriented automatic transmission oil pan engineered for General Motors 4L80E transmissions.
The B&M Hi-Tek Deep Transmission Pan is an aftermarket transmission oil pan designed to replace the factory pan on compatible GM 4L80E automatic transmissions.
The manufacturer identifies A356-T6 cast aluminum construction with thick external cooling fins. These fins increase the exterior surface area of the housing and are intended to assist heat transfer from the transmission fluid to the surrounding air.
The deeper pan configuration increases transmission fluid capacity by approximately three US quarts compared with the original equipment steel pan. The increased fluid volume can help support transmission thermal management, although actual operating temperature improvements depend on vehicle load, airflow, ambient temperature, cooling-system configuration, and driving conditions.
The pan also incorporates a service drain port with a magnetic drain plug. The magnetic element is intended to collect ferrous wear particles circulating in the transmission fluid, helping make routine fluid servicing and inspection more convenient.
Technical specifications
Specification | Manufacturer information |
|---|---|
Product Type | Deep automatic transmission oil pan |
Part Number | 70295 |
Transmission | GM 4L80E |
Material | A356-T6 cast aluminum, per product overview |
Finish | Natural aluminum |
Pan Style | Deep |
Additional Fluid Capacity | 3 US quarts |
Listed Capacity | 16.5 US quarts |
External Cooling Fins | Yes |
Drain Port | Yes, per product overview |
Magnetic Drain Plug | Yes, per product overview |
Filter Extension | Included |
Mounting Hardware | Included |
Temperature Sensor Bung | No |
Warranty | Lifetime Limited Warranty |
UPC | 019695702953 |
Package Contents
The manufacturer's description identifies the deep transmission pan, filter extension, filter seal, filter support, magnetic drain plug, mounting hardware, and installation instructions.
There is a discrepancy on Holley's product page: the overview mentions a pan gasket, while the structured specifications say a gasket is not included. The structured specifications also conflict with the overview regarding the drain plug. Confirm both items against the actual package before advertising them as included. A transmission filter is not listed as included.
Quality Testing and Inspection
The manufacturer identifies the A356-T6 aluminum construction, external cooling fins, and additional fluid capacity as design characteristics.
Before installation, inspect the cast aluminum housing for cracks, porosity, impact damage, or deformation. Check the mounting flange for visible irregularities and verify that the drain-port threads and supplied mounting hardware are undamaged.
Confirm that the filter extension and associated components are appropriate for the transmission configuration. Installation should follow B&M's instructions, including the specified fastening sequence, torque values, gasket requirements, and transmission fluid filling procedure.
After installation, the transmission should be inspected for fluid leaks, correct fluid level, adequate ground clearance, and unobstructed operation. The installer should also verify that the deeper housing does not interfere with adjacent vehicle components.
Quality Testing Report Status: The manufacturer publishes construction specifications and design claims relating to additional fluid capacity and cooling performance. However, no SKU-specific thermal test results, pressure-test measurements, casting inspection certificate, or laboratory durability report were verified in the reviewed listing. Compression testing is not applicable to this component.
Product | Manufacturer part # | Your sale price |
|---|---|---|
B&M Holeshot 2400 Torque Converter |
| $993.14 |
Holley EFI Transmission Control Harness |
| $414.64 |
B&M Hi-Tek Deep Transmission Pan |
| $486.14 |
All three direct product links point to your approved Holley.com website.
The technical descriptions are suitable as product-content drafts for Auto Vehicle Parts. Before publishing, verify the current manufacturer price, applicable warranty, actual inventory, exact fitment, and package contents. The manufacturer photos should be obtained from the linked product pages, subject to permission to reuse them commercially.
To ensure 100% plug-and-play fitment, our technical specialists run every order through our nationwide OEM interchange database before freight shipment.
| Specification | Donor vehicle & component verification |
|---|---|
| Part Condition | Certified Pre-Owned OEM Used Component |
| Part / Casting Number | 70295 |
| Donor Mileage | B&M |
| Testing Procedure | Cold compression tested, borescope cylinder wall inspection, and leak-down test passed. |
| Warranty Protection | Lifetime Limited Warranty, subject to manufacturer terms |
| Freight Shipping | Commercial liftgate freight included (3-5 business days across mainland USA) |
Engine arrived securely bolted to a heavy-duty wooden pallet with shrink wrap. Compression test was exactly as advertised. Dropped right into my truck and fired up with zero CEL codes. Saved over $2,000 compared to dealer crate motor!
Your auto parts cart is currently empty.
Shop Used Auto Parts