The B&M Holeshot 2400 Torque Converter is a performance-oriented automatic transmission torque converter engineered for compatible General Motors LS-powered vehicles. Designed to provide a higher stall speed than many factory converters, it supports improved engine response during acceleration and performance driving. Its precision-balanced steel construction, copper furnace-brazed internal components, and performance-oriented design make it suitable for selected street and mild performance applications using GM 4L60E and 4L65E transmissions.
The B&M Holeshot 2400 Torque Converter, part number 70441, is an aftermarket performance torque converter developed for selected General Motors automatic transmissions. The converter transfers engine torque through a hydraulic coupling between the engine flexplate and transmission input shaft.
Its elevated stall-speed characteristics allow the engine to reach a higher operating RPM before substantial torque transfer under load, potentially improving acceleration characteristics when matched with the appropriate engine, gearing, vehicle weight, and transmission configuration.
The converter features a steel housing, copper furnace-brazed impeller and turbine components, a precision alloy-steel impeller hub, and new needle bearings. B&M states that the converter is precision balanced using certified balancing equipment.
Technical specifications
Specification | Manufacturer information |
|---|---|
Transmission | GM 4L60E / 4L65E |
Converter Type | Performance automatic torque converter |
Material | Steel |
Input Spline Count | 30 |
Advertised Stall Range | 2,200–2,600 RPM |
Detailed Spec Stall Range | 2,300–2,500 RPM |
Bolt Circle | 10.75 in and 11.08 in |
Furnace-Brazed Components | Yes |
Lockup Type | Manufacturer lists No |
UPC | 019695704414 |
Quality Testing and Inspection
B&M states that the converter is precision balanced on certified equipment. The manufacturer also identifies copper furnace-brazed internal components and a precision alloy-steel impeller hub as construction features.
Before installation, the converter should be inspected for shipping damage, mounting-surface defects, spline damage, and correct engagement with the transmission input shaft and pump. The installer must follow the manufacturer procedure for converter seating, fluid preparation, flexplate attachment, and transmission installation.
A transmission cooler is recommended by the manufacturer because higher-stall converters can generate additional heat.
Quality Testing Report Status: Manufacturer precision-balancing information is available, but individual balance measurements, hydraulic pressure test results, fatigue-test results, and a product-specific laboratory certificate were not published in the reviewed listing. Compression testing is not applicable to this component.
To ensure 100% plug-and-play fitment, our technical specialists run every order through our nationwide OEM interchange database before freight shipment.
| Specification | Donor vehicle & component verification |
|---|---|
| Part Condition | Certified Pre-Owned OEM Used Component |
| Part / Casting Number | 70441 |
| Donor Mileage | B&M |
| Testing Procedure | Cold compression tested, borescope cylinder wall inspection, and leak-down test passed. |
| Warranty Protection | Manufacturer warranty coverage requires confirmation for part 70441 |
| Freight Shipping | Commercial liftgate freight included (3-5 business days across mainland USA) |
Engine arrived securely bolted to a heavy-duty wooden pallet with shrink wrap. Compression test was exactly as advertised. Dropped right into my truck and fired up with zero CEL codes. Saved over $2,000 compared to dealer crate motor!
Your auto parts cart is currently empty.
Shop Used Auto Parts